Marine Products
Epo-chem™ 500 series solvent-free, wet & rust tolerant (primer) epoxy systems were designed with great flexibility; the main advantages being that any method of surface preparation, i.e. mechanical, HP and UHP water wash, dry or wet grit blasting can be utilised.
There would be no requirement for ventilation or dehumidification; reduced H&S consideration and no fire hazards for storage or application. Chemco marine products have passed the most stringent IMO tests (uniquely on the rusty and wet & rusty steel) and have been approved by Lloyds for maintenance on new build (including on shop primed steel). They are also FDA approved for food and beverage, dry cargo and potable water.
To understand the flexibility of Chemco coatings in preparation techniques and applications of the systems, Chemco have introduced this Maintenance and Repair Guide which includes product features and benefits, an understanding of corrosion, typical specifications by vessel area and FAQ’s, with guidance for crew, contractors and dockyard personnel in all aspects of corrosion protection.
Ballast tanks and double bottoms are areas of complex steel structure with poor access and permanent condensation. Chemco's solvent-free wet & rust tolerant primer Epo-chem™ RS 500P and solvent-free, wet tolerant,glassflake epoxy top-coat Epo-chem™ RA 500M are perfectly suited for small patch repairs or complete refurbishment.
Chemco solvent-free systems offer long-term, maintenance-free protection of up to 25 years.
For underwater section, utilise solvent-free, wet & rust tolerant primer Epo-chem™ RS 500P with smooth glassflake topcoat to reduce drag with excellent impact and abrasion resistance.
For ice breakers, utilise super smooth, abrasion and impact resistant, solvent-free, ceramic epoxy system Ceram-chem™ RP 500.
Boottop: simply water wash and apply Epo-chem™ RS 500P.
All areas are primed with solvent-free, wet & rust tolerant primer Epo-chem™ RS 500P followed by application of one coat of Epo-chem™ RC 500GTC an acrylic epoxy, UV resistant colour topcoat.Alternatively, use multi-purpose, wet & rust tolerant, UV resistant Epo-chem™ RL 500PF.For additional impact and abrasion resistance (e.g. fender areas) topcoat with solvent-free, ceramic epoxy Ceram-chem™ RP 500.All areas and coatings can be over-coated without the need for grit blasting
Quick and fast solutions, including one-coat system, offering long-term protection for severe abrasion, impact and chemical spillage. Can be made to non-slip or anti-slip with flexibility of application in all weathers.
Solvent-free wet & rust tolerant system Epo-chem™ RS 500P or utilise multi-purpose, wet and rust tolerant system Epo-chem™ RL 500PF for all decks and pipework up to 150° C
For livestock carrier deck or food contact points it can be useful with its certified systems.
Flexible surface preparation and application utilising wet & rust tolerant primer Epo-chem™ RS 500P and solvent-free, wet tolerant glassflake epoxy Epo-chem™ RA 500M with good chemical resistance and FDA approvals. The systems offer long-term protection for carriage of coal, iron ore, grain, fuel, crude oil, potable water and other cargos. Major repairs of badly damaged, corroded and worn tanks utilising Chemco's unique fibreglass system, eliminating the need for metal replacement.
Extremely quick, environmentally friendly, odourless, single pack acrylic water-based system (Fast-guard™ RN 500P, Fast-guard™ RN 500TC); which is fire retardant with extensive colour range, can be applied direct to existing systems without the need for major surface preparation. If a primer is required, solvent-free, wet & rust tolerant Epo-chem™ RS 500P can be utilised.
A range of solvent-free, water-based, light or heavy duty flooring systems.
Use solvent-free, wet & rust tolerant primer Epo-chem™ RS 500P and solvent-free, wet tolerant glassflake epoxy Epo-chem™ RA 500M if required. Lightweight levelling compound (Nano-lite™) and special topcoats (Easi-flor™ RX 800, Chem-deck™ RG 800, Diamond-top™) are available for specialist applications. Other specialist systems specifically designed for galley spaces, refrigeration rooms, wet rooms and shower areas.
All systems are easily cleaned and maintained.
Usually situated in difficult access areas, maintenance and refurbishments of the water tanks are extremely difficult.Utilising Chemco's solvent free, wet & rust tolerant primer Epo-chem™ RS 500P and solvent-free, wet tolerant, glassflake epoxy topcoat Epo-chem™ RA 500M specifically designed for fast, easy, odourless application without disruption to engineers and crew. Epo-chem™ RA 500M offers very good chemical resistance and can therefore be utilised for potable/grey water, oil, settling, mud and brine tanks.
A comprehensive range to suit all engine room areas and spaces, e.g. bilges, under gratings, holding tanks, high temperature equipment and general maintenance coatings. Solvent-free, wet & rust tolerant primer Epo-chem™ RS 500P and solvent-free, wet tolerant, glassflake epoxy topcoat Epo-chem™ RA 500M for general applications Epo-chem™ RW 500, a high temperature chemical resistant, solvent-free, novolac glassflake epoxy system, can be utilised for hot tanks and condenser units. Fast-guard™ RN 500FR (Fire Retardant), acrylic water-based, single pack system for walls and ceilings. Easi-cote™ RX 500MT (Matt Finish) or Easi-gloss™ RX 500GS (Gloss Finish) water-based epoxy for walls, ceilings and equipments. Epo-chem™ RL 500PF wet & rust tolerant system, can be utilised for high temperature pipework; exceptional system for all areas to combat corrosion under insulation.
A range of high temperature wet and/or rust tolerant coating systems.
Epo-chem™ RL 500PF for application to hot surfaces up to 150°C.
Hot-cote™ RA 900 for application to hot surfaces up to 850°C.